|
SPECIFICATIONS |
PIONEER GHL-175 |
| Description |
|
| Height of Centre(mm) |
215 |
| Swing Over Bed (mm) |
425 |
| Swing Over Cross Slide (mm) |
250 |
| Distance Between Center (mm) |
750/1000 |
| Max. Swing in Gap (mm) |
620 |
| BED |
|
| Bed Type |
2 V & 2 Flat |
| Bed Width (mm) |
279mm |
| Length of Gap in Front of Face Plate (mm) |
120 |
| HEAD STOCK |
|
| Number of Spindle Speeds |
8 |
| Spindel Speed Range : R.P.M. |
54 TO 1200 (std.) 35 TO 1200 (optnl.) |
| Type & Size of Spindle Nose |
Cam Lock, size A2-4 |
| Spindle Bore ( mm) |
40 mm |
| Spindle Taper Number |
MT - 5 |
| Diameter of Front Bearing |
OD 110 x ID 60 |
| CAPICITY THREADS |
|
| Number of Threads |
56 |
| Range of Metric Threads./No. |
0.5 to 7.5mm(20) |
| Range of Inch Threads/No. |
60 to 4 TPI(36) |
| Leed Screw Dia (mm) |
31.75 |
| Leed Screw Pitch (mm) |
4 T.P.I. |
| SADDLE |
|
| Cross Slide Dimension(mm) |
168 x 367 |
| Cross Slide Travel(mm) |
280 |
| Tool shank Section(mm) |
25mm x 25mm |
| Saddle Traverse(mm) |
720mm |
| Compound SlideTraverse(mm) |
130 |
| TAIL STOCK |
|
| Spindle Dia(mm) |
50.8 |
| Spindle Taper Number |
MT-3 |
| Spindle Travel |
175 |
| Weight |
1000kgs.(approx) |
| |
|
|
MODEL |
FLOOR SPACE
(APPROX) |
WEIGHT kgs.
(APPROX) |
CASE DIMENSION |
| |
|
NET |
GROSS |
L |
x |
W |
x |
H |
GHL -1 |
2300 X 1000 MM |
800 |
1000 |
2500 |
|
1100 |
|
1600 |
GHL -2 |
2600 X 1000 MM |
1000 |
1200 |
2800 |
|
1100 |
|
1600 |
|
STANDARD ACESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.
EXTRA ACCESSORIES
Collet attachment
collet ( 1 mm to 25 mm )
each collet cost
collet ( 4 mm to 40 mm ) each collet cost
Taper Turning Attachment
Rear Tool Post
Mechanical Brake
Machine Lamp
Chuck Flange 8"
Chuck Flange 10"
Face plate ( 350 mm Dia )
Follow Rest
Steady Rest
Quick change Tool Post
Coolant Pump & Fitting
Carrier Plate
Extra Center Height 2"
Digital Read out System (DRO) |
Note
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalogue. |
|
|
|
