ECOTURN CNC | GHL175 | GHL215 | GHL250 | SAG 254 | ECOTURN | GHL 250 PL | GHL 300
SPECIFICATIONS
GHL 250 PL
Description
Height of Centre(mm) 250
Swing Over Bed (mm) 490
Swing Over Cross Slide (mm) 320
Distance Between Center (mm) 1000/1500
Max. Swing in Gap (mm) 750
BED  
Bed Type 2 V & 2 Flat
Bed Width (mm) 280
Length of Gap in Front of Face Plate (mm) 160
HEAD STOCK  
Number of Spindle Speeds 8 (Std.) & 16 (Optional)
Spindle Speed Range : R.P.M. 54 - 1200 (Std.) & 71 - 6100 (Optional)
Type & Size of Spindle Nose A/2 - 6
Spindle Bore ( mm) 55
Spindle Taper Number MT - 5
Diameter of Front Bearing OD 150 x ID 85
FEEDS AND THREADS  
Number of Feeds 76
Range of longitudinal Feeds (mm/Rev) 0.026 to 0.936
Range of Cross Feeds (mm/rev) 0.016 to 0.62
Number of Threads 106
Range of Metric Threads/No. 0.2 to 7 mm (33)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.3 to 3 Module (16)
Range of D.P. Threads/No.

44 to 8 D.P. (21)
Leed Screw Dia (mm) 31.75
Leed Screw Pitch (mm) 6
SADDLE  
Cross Slide Dimension (mm) 180 x 415
Cross Slide Travel (mm) 225
Tool Shank Section (mm) 25 x 25
Saddle Traverse (mm) 870 / 1370
Compound Slide Traverse (mm) 130
TAIL STOCK  
Spindle Dia (mm) 50.8
Spindle Taper Number MT - 3
Spindle Travel 190
Lateral Move to Tail Stock (mm) 5
MOTOR  
Main MKotor (Kw.) 2.25
MODEL
FLOOR SPACE
(APPROX)
WEIGHT kgs.
(APPROX)
CASE DIMENSION
   
NET
GROSS
L
x
W
x
H
GHL -3
2600 X 1000 MM
1200
1900
2800
1100
1600
GHL -4
3100 X 1000 MM
1300
1500
3300
1100
1600

STANDARD ACESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electrical controls, Thread Dial Indicator, Mechanical Brack with Starting Third Shaft, chuck flange, Coolant Pump with Fitting, Rear Splash Guard (except GHL - 300) chip Tray.

EXTRA ACCESSORIES
Collet attachment & collets
Taper Turning Attachment
Rear Tool Post
Machine Lamp
Face plate
Follow Rest
Steady Rest
Quick change Tool Post
Carrier Plate
True Chuck
Dog Chuck
Note
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalogue.