ECOTURN CNC | GHL175 | GHL215 | GHL250 | SAG 254 | ECOTURN | GHL 250 PL | GHL 300
SPECIFICATIONS
GHL 300
Description
Height of Centre(mm) 300
Swing Over Bed (mm) 590
Swing Over Cross Slide (mm) 370
Distance Between Center (mm) 1000/1500/2000/2500/3000/3500
Max. Swing in Gap (mm) 800
BED  
Bed Type 2 V & 2 Flat
Bed Width (mm) 355
Length of Gap in Front of Face Plate (mm) 150
HEAD STOCK  
Number of Spindle Speeds 12
Spindle Speed Range : R.P.M. 27 to 700
Type & Size of Spindle Nose A/2 - 8
Spindle Bore ( mm) 80
Spindle Taper Number MT - 6
Diameter of Front Bearing OD 200 x ID 110
FEEDS AND THREADS  
Number of Feeds 72
Range of longitudinal Feeds (mm/Rev) 0.057 to 0.460
Range of Cross Feeds (mm/rev) 0.003 to 0.128
Number of Threads 105
Range of Metric Threads/No. 0.2 to 7 mm (33)
Range of Inch Threads,No. 72 to 7 TPI (33)
Range of Module Threads/No. 0.4 to 3 Module (15)
Range of D.P. Threads/No.

44 to 8 D.P. (21)
Leed Screw Dia (mm) 38.1
Leed Screw Pitch (mm) 6
SADDLE  
Cross Slide Dimension (mm) 255 x 455
Cross Slide Travel (mm) 350
Tool Shank Section (mm) 25 x 25
Saddle Traverse (mm) 900/1400/1900/2400/2900/3400
Compound Slide Traverse (mm) 150
TAIL STOCK  
Spindle Dia (mm) 63.5
Spindle Taper Number MT - 4
Spindle Travel 200
Lateral Move to Tail Stock (mm) 5
MOTOR  
Main MKotor (Kw.) 5.5
MODEL
FLOOR SPACE
(APPROX)
WEIGHT kgs.
(APPROX)
CASE DIMENSION
   
NET
GROSS
L
x
W
x
H
GHL -3
2600 X 1000 MM
1200
1900
2800
1100
1600
GHL -4
3100 X 1000 MM
1300
1500
3300
1100
1600

STANDARD ACESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electrical controls, Thread Dial Indicator, Mechanical Brack with Starting Third Shaft, chuck flange, Coolant Pump with Fitting,

EXTRA ACCESSORIES
Collet attachment & collets
Taper Turning Attachment
Rear Splash Guard (except GHL - 300) Chip Tray.
Rear Tool Post
Machine Lamp
Face plate
Follow Rest
Steady Rest
Quick change Tool Post
Carrier Plate
True Chuck
Dog Chuck
Note
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalogue.