SPECIFICATIONS |
PIONEER GHL-175 |
| Description |
|
| Height of Centre(mm) |
175 |
| Swing Over Bed (mm) |
340 |
| Swing Over Cross Slide (mm) |
176 |
| Distance Between Center (mm) |
750/1000 |
| Max. Swing in Gap (mm) |
620 |
| BED |
|
| Bed Type |
2 V & 2 Flat |
| Bed Width (mm) |
280 |
| Length of Gap in Front of Face Plate (mm) |
160 |
| HEAD STOCK |
|
| Number of Spindle Speeds |
8 (std.) 16(optnl.) |
| Spindel Speed Range : R.P.M. |
54 TO 1200 (std.) 35 TO 1200 (optnl.) |
| Type & Size of Spindle Nose |
Cam Lock, size D1-4 |
| Spindle Bore ( mm) |
40 mm |
| Spindle Taper Number |
MT - 5 |
| Diameter of Front Bearing |
OD 110 x ID 60 |
| FEEDS AND THREADS |
|
| Number of Feeds |
72 |
| Range of longitudinal Feeds (mm/Rev) |
0.033 to 0.468 |
| Range of Cross Feeds (mm/rev) |
0.021 to 0.301 |
| Number of Threads |
103 |
| Range of Metric Threads/No. |
0.2 to 6.5 mm (31) |
| Range of Inch Threads,No. |
72 to 4 TPI (36) |
| Range of Module Threads/No. |
0.4 to 3 Module (15) |
| Range of D.P. Threads/No. |
44 to 8 D.P. (21) |
| Leed Screw Dia (mm) |
31.75 |
| Leed Screw Pitch (mm) |
6 mm |
| SADDLE |
|
| Cross Slide Dimension (mm) |
178 x 415 |
| Cross Slide Travel (mm) |
225 |
| Tool Shank Section (mm) |
22 x 22 |
| Saddle Traverse (mm) |
640/890 |
| Compound Slide Traverse (mm) |
130 |
| TAIL STOCK |
|
| Spindle Dia (mm) |
50.8 |
| Spindle Taper Number |
MT-3 |
| Spindle Travel |
175 |
| Lateral Move to Tail Stock (mm) |
5 |
| MOTOR |
|
| Main MKotor (Kw.) |
1.5 |
