ECOTURN CNC | GHL175 | GHL215 | GHL250 | SAG 254 | ECOTURN | GHL 250 PL | GHL 300
SPECIFICATIONS
PIONEER SAG-254
Description
Height of Centre(mm) 254
Swing Over Bed (mm) 500
Swing Over Cross Slide (mm) 300
Distance Between Center (mm) 1000/1500/2000/2500/3000
Max. Swing in Gap (mm) 800
BED  
Bed Type 2 V & 2 Flat
Bed Width (mm) 325
Length of Gap in Front of Face Plate (mm) 175
HEAD STOCK  
Number of Feeds 8
Spindel Speed Range : R.P.M. 30 TO 1230
Type & Size of Spindle Nose Threaded Type
Spindle Bore ( mm) 52
Spindle Taper Number MT -6
Diameter of Front Bearing OD 140 x ID 80
FEEDS AND THREADS  
Number of Feeds 72
Range of longitudinal Feeds (mm/Rev) 0.57 to 1.600
Range of Cross Feeds (mm/rev) 0.003 to 0.128
Number of Threads 105
Range of Metric Threads/No. 0.2 to 7 mm (33)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.4 to 3 Module (15)
Range of D.P. Threads/No.

44 to 8 D.P. (21)
Leed Screw Dia (mm) 38.1
Leed Screw Pitch (mm) 6 mm
SADDLE  
Cross Slide Dimension (mm) 445 x 200
Cross Slide Travel (mm) 325
Tool Shank Section (mm) 25 x 25
Saddle Traverse (mm) 890/1390/1890/2390/2890
Compound Slide Traverse (mm) 150
TAIL STOCK  
Spindle Dia (mm) 57.15
Spindle Taper Number MT-4
Spindle Travel 200
Lateral Move to Tail Stock (mm) 5
MOTOR  
Main MKotor (Kw.) 2.25
MODEL
FLOOR SPACE
(APPROX)
WEIGHT kgs.
(APPROX)
CASE DIMENSION
   
NET
GROSS
L
x
W
x
H
SAG -1
3200 X 1000 MM
1500
1775
3400
1100
1400
SAG -2
3800 X 1000 MM
1850
2150
4000
1100
1400
SAG -3
4300 X 1000 MM
2250
2550
4500
1100
1400
SAG -4
4800 X 1000 MM
2400
2800
5000
1100
1400
SAG -5
5300 X 1000 MM
2550
2900
5500
1100
1400

STANDARD ACESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-4 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Change Gear Set, Chip Tray.
EXTRA ACCESSORIES
Cam Lock Spindle in Lieu of standard
12" Center height in Lieu of standard
Face Plate (450 mm)
Taper Turning Attachment
Electromagnetic brake
Mechanical brake
Rear Tool Post with Long Cross Slide
Keyway Cutting Attachment
Chuck Flange 8"
Chuck Flange 10"
Chuck Flange 12"
Follow Rest 10"
Steady Rest 10'
Quck change Tool Post with Tool Holders
Coolant pump with fittings
Digital Read out System (DRO)

Note
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalogue.